Planning controls for Georges River
Full SEPP, LEP, and DCP controls for any Georges River address — setbacks, parking, height, floor space ratio, landscaping, and heritage with clause citations. Free. Also check granny flat eligibility and flood risk for any Georges River address.
Data sources
SEPP + LEP + DCP
Three tiers of controls
DCP controls
679 provisions
Full provision text
Coverage
All NSW
LEP + SEPP for every address
Check planning controls for your Georges River property
Enter any Georges River address to see the full SEPP, LEP, and DCP controls with clause citations.
Open Planning Controls ToolDCP controls in Georges River by topic
Georges River Council's Development Control Plan contains 679 structured provisions across 27 topics. Enter an address above to see which controls apply to a specific property.
Parking
137# 3.13 Land Use Types | Parking Rate (Minimum)
Setbacks
78# 6.1.2 2 Front Setbacks 2. Balconies cannot encroach into the front setback space.
Residential development
48# 3.13 Land Use Types | Parking Rate (Minimum) Multi-dwelling housing | • 1 space per dwelling
Heritage
40c) Existing dwellings in the Heritage Conservation Areas are to be retained.
Signage
38g. All signs must display a current Approved Sign/Stand sticker (under development).
Height
32c. Should not exceed a vertical height of 0.5m
Trees and vegetation
32# 3.8 2 Controls 2. View pruning is to comply with Council's Tree Management Policy.
Landscaping
31c) Protect the natural scenic landscape qualities of sensitive areas such as the Georges River foreshore.
Stormwater
26j) Minimise impacts of on-site stormwater detention on existing ground levels and streetscape quality.
Access
24# 3.13 31 Pedestrian 31. Pedestrian entrances and exits shall be separated from vehicular access paths.
Solar access
23# 6.1.2 3 Controls 3. Private open space is to be located so as to maximise solar access.
Building form
23c) Requires new development to integrate and blend into the existing streetscape and neighbourhood character.
Privacy
21# 6.1.4 2 Controls 2. Privacy screens are required along the side of balconies to minimise direct overlooking.
Commercial
21The spaces are attached to the same strata title in residential buildings and small commercial or retail developments;
Environmental
20a) Prevent direct loss of habitat in and adjoining Green Web areas and enhance long term sustainability.
Waste management
14a) Ensure that adequate provision is made for waste storage and recycling facilities within development.
Plus 11 more topics. Enter an address to see all controls.
What the planning controls assessment covers
SEPP controls
State-level policies including Housing SEPP 2021, Transport & Infrastructure, and Coastal Management.
LEP controls
Zoning, height of buildings, floor space ratio, minimum lot size, heritage, and additional permitted uses.
DCP controls
Council-specific setbacks, parking rates, landscaping requirements, private open space, and design controls.
Spatial overlays
Flood, bushfire, heritage, acid sulfate soils, biodiversity, and other mapped constraints from the NSW Planning Portal.
Planning controls in Georges River — common questions
What planning controls apply in Georges River?
Georges River properties are governed by the Georges River LEP 2021 and Georges River DCP. Controls cover height, FSR, setbacks, parking, landscaping, and heritage. Enter your address for the specific controls.
What heritage controls apply in Georges River?
Georges River has heritage items and heritage conservation areas, particularly in the former Kogarah and Hurstville areas. Heritage items are listed in the LEP. The tool shows whether your property is heritage-affected.
What parking requirements apply in Georges River?
Parking rates come from the Georges River DCP and vary by development type and location. The tool shows the specific parking requirements applicable to your address.
Other property checks for Georges River
Also check nearby councils
Planning controls are sourced live from the NSW Planning Portal, PostGIS spatial overlays, and structured DCP provisions. Controls shown are indicative — always verify with the relevant council or a registered town planner before making development decisions.